|
6PPC
Feb 22, 2014 21:55:13 GMT -5
Post by HMC710 on Feb 22, 2014 21:55:13 GMT -5
Got the Match barrel profiled and drilled for the gas system. Using the same gas system as the shooter and will work on some load development. Weather is turning nice so very busy on the range. Going to put an adjustable gas block on and see how it goes.
|
|
|
6PPC
May 11, 2014 6:57:14 GMT -5
Post by HMC710 on May 11, 2014 6:57:14 GMT -5
Well...... Took the 6PPC Match to the range last week using the loads from the Shooter and didn't work out too well. Tried to load the first round and OAL was too long. Bolt would not close and pulled the case off the bullet when I ejected the round. Bullet was stuck in the bore and into rifling about .050" so we'll shorten up a few and try it again. I did put on an adjustable gas block so we'll see what happens with that. The shooter with the loads Bro worked up won't cycle the action.
|
|
|
6PPC
May 25, 2014 22:17:40 GMT -5
Post by HMC710 on May 25, 2014 22:17:40 GMT -5
Shortened up the rounds by .050" and guess what, still too long. Will get this one on the bench and find out where things are...
|
|
|
6PPC
Jun 1, 2014 20:00:53 GMT -5
Post by HMC710 on Jun 1, 2014 20:00:53 GMT -5
Pulled everything apart and did some checking on the Match barrel. The throat is shorter for the small bench rest bullets and it doesn't like the profile of the Sierra 85gr but the 62gr Cheek's do just fine. Will bring these along next time and see what happens.
|
|
|
6PPC
May 30, 2015 18:41:04 GMT -5
Post by HMC710 on May 30, 2015 18:41:04 GMT -5
Was going to shoot at a match with Bro next saturday but the don't want no stinking AR's (I told them I could shut the gas off....)
|
|
|
6PPC
Jun 10, 2015 8:47:57 GMT -5
Post by HMC710 on Jun 10, 2015 8:47:57 GMT -5
Had the 6PPC Shooter along also. Bro just had to try it out! Had the Weaver 6x on it and shooting at a piece of wind flag stuck in the back stop. Even tho Bro complained of "no rest, no bag, no scope, blah, blah, blah" he was smilin'
|
|
|
6PPC
Jul 25, 2015 22:59:29 GMT -5
Post by HMC710 on Jul 25, 2015 22:59:29 GMT -5
That was actually the Match gun! Been so long couldn't tell the difference.... Got the Shooter out and the long bullets wouldn't chamber. Have to tweak some things and run some tests. Now to find out where the dies went too.....
|
|