|
|
Post by mikeym on Jul 6, 2017 21:28:52 GMT -5
I'm new to the sight - I am getting once fired Tok brass. Right now I have about 3000 cases & looking to sell some. I shoot the TT-C & PPS43.
I'm not sure what the going rate for once fired Tok brass is. Any help out there would be appreciated.
|
|
|
|
Post by beobill on Jul 7, 2017 15:28:52 GMT -5
New [REDACTED] is about 20 cents a case, so you should beat that.
|
|
|
|
Post by HMC710 on Jul 8, 2017 8:43:52 GMT -5
FYI - proboards frowns on site sales.....
Welcome to the forum.
|
|
|
|
Post by beobill on Jul 8, 2017 12:46:24 GMT -5
Yup - pretty much universal rule for boards. But that's an answer to your question; else nobody could answer. And edited...  |
|
|
|
Post by HMC710 on Feb 10, 2019 18:32:12 GMT -5
Is it just me or is Tok brass and ammo getting shorter? Tested some PPU Defense today and measures .007" shorter than my old reloads in a chamber and .003"shorter than my Red surplus. And to top it off, my new Lee dies (Tokarev / 30 M/L !) size them even shorter  |
|
|
|
Post by 22boomer on Feb 12, 2019 13:41:50 GMT -5
Tim,
Funny you should say something about the tok brass being a bit shorter. I started using Starline 30 Mauser brass because the 30 Mauser is supposed to be a bit longer and find it's perfect for doing my 7.62X35 Tok loads. Their small brass may change from time to time but I've been doing great using the Starline 30 Mauser in place of the Tok brass. Only problem I've found is the Mauser brass is sometimes hard to find.
|
|
|
|
Post by HMC710 on Feb 12, 2019 20:46:44 GMT -5
Yea, their Tok brass is .96 ish…. waaayyy short. Adds up to very little neck. WE'll see if it will stretch any.....
|
|
