|
Post by HMC710 on Oct 19, 2023 7:55:51 GMT -5
Hey All,
For all our loyal customers, you know the journey we've been on these last few years, thank you so much for your patience, and its good to be back at the shop (almost full time, but more on that later).
We've tried, modified, and made, a bunch of mags to work with the 22 TCM and all of that was done with manual machines tweaking parts, cutting, fitting, welding, etc on existing mags to get the TCM to feed right and we could never get rid of the the nose high jams.
The CMMG (mean arms) pmag conversion can be modified to work with the TCM, but we have had good and bad results so there was still some work to do.
Fast forward to a month ago and our new 3D printer and we started the design from scratch and so far here is the result.
We have a lot of work to do to get these ready for production so enjoy and stay tuned!
|
|
|
Post by HMC710 on Oct 28, 2023 19:13:57 GMT -5
We've made a few minor changes to the TCM mags and have all the paperwork in to protect our work. Looking at all the mfg options to get these out to the TCM shooter!
|
|
|
Post by HMC710 on Nov 7, 2023 9:15:04 GMT -5
Getting range reports back with our beta test team with over 500 successful rounds through our new mags. YAY!
|
|
|
Post by HMC710 on Nov 24, 2023 16:03:07 GMT -5
More range reports with round counts over 1000! Thanks for all the feedback. We are making mags with different materials and just added nylon with carbon fiber! Tested it out last afternoon and ran great right out of the box.
Getting our ducks in a row and will get these out for sale quickly.
|
|
|
Post by HMC710 on Dec 4, 2023 21:20:49 GMT -5
Lots of input on our mags and results are all positive! Working hard to get these out to all yall!!!!!
|
|
|
Post by HMC710 on Feb 25, 2024 7:51:41 GMT -5
Been making mags and doing testing with different materials for the mags to get best results. Thanks for all the support and feedback. For the reloaders, we've made a 1.5" long mag as well as a 1.69" long mags. The magwell is not ideal for the 30Carbine or 5.7 so thats a dedicated build you can read about on that page. Reloaders instantly get past the factory 1.28" OAL with any real bullet and we've loaded them from 30gr to 75gr. We have a mule version of the 1.69s for the really long bullets and trying some things to enhance feeding. Same with the 1.5" version. Stay tuned.
|
|
|
Post by HMC710 on Apr 23, 2024 18:30:55 GMT -5
Here is our trio of 22 TCM mags. We tested a customers special barrel build with 3 different mag lengths, Std = 1.28", M = 1.50", and L = 1.69". The ammo was factory rounds in both the Std and M mags, both mags did mag dumps with no problem. We then reloaded Hornady 55gr VMax to 1.58" oal. This was as far out as they would set and still chamber. Any longer and they hit the rifling and wouldn't chamber. To run longer rounds we would need to throat the barrel accordingly. The 55gr VMax's all fed 100%! Mags are available at www.thearguy.com check it out.
|
|