|
Post by HMC710 on Aug 9, 2017 22:33:07 GMT -5
1. Yes 2. yes 3. 5, 20, & 30 4. Orders yes, pmt no: would like to get further development done on followers. 5. YES! We are actually doing 3: 357 AMAX, 357 AMAG/M1 Carbine/long Tok-RE-TCM, Tok/Mid TCM. If the 357 AMAG / long TCM don't play well together we will split them up into two different set ups. You are absolutely correct, the BHO is what makes these mags, Not to mention the price reduction for mag/adapter set up. Did more follower work on the TCM's today and found out what didn't work....
|
|
|
Post by HMC710 on Aug 10, 2017 23:24:30 GMT -5
Did some shooting today with the TCM/Tok mag set ups. Working on Follower / Ramp geometry with a couple of different set ups. I'm telling ya, the bolt hold open makes these so much nicer than the Tok set ups. (even tho I ran another batch of tok mag adapters today....) Trying to get working models out there, but just don't want to have issues, especially when the guys don't answer the *&^%$ phone...
|
|
|
Post by HMC710 on Aug 12, 2017 22:28:33 GMT -5
Worked on the TCM feed ramp geometry and have a follower that works, but not what I want to end up with. Travelling next few days so we'll do some live fire testing at the range and go from there.
|
|
|
Post by 22boomer on Aug 13, 2017 8:38:52 GMT -5
Worked on the TCM feed ramp geometry and have a follower that works, but not what I want to end up with. Travelling next few days so we'll do some live fire testing at the range and go from there. When you get a chance could you steer me towards posts or info on what you refer to as the 357 AMAX or 357 MAX. I like cartridges that work in a carbine that uses larger caliber heavy bullets. I scanned through your stuff and just could not find it.
|
|
|
Post by HMC710 on Aug 15, 2017 21:23:27 GMT -5
22, its under Firearms, 357 mag and max rimless
|
|
|
Post by 22boomer on Aug 16, 2017 18:14:57 GMT -5
Thanks for that info. I had forgotten all about that round.
|
|
|
Post by HMC710 on Aug 20, 2017 20:44:39 GMT -5
Here are a couple of test mules for the 22 TCM dedicated mags in the 30 Carbine length The pistol is a new fast twist sub barrel we did.
|
|
|
Post by 22boomer on Aug 21, 2017 7:17:21 GMT -5
Here are a couple of test mules for the 22 TCM dedicated mags in the 30 Carbine length View AttachmentThe pistol is a new fast twist sub barrel we did. That mag looks really good! The heavy GI bullets are less expensive than the standard commercial stuff. Have you tried the 55gr GI type bullets yet? I clicked on the thumbnail picture of the mag to get a larger version and they look really impressive.
|
|
|
Post by mtndrew on Aug 27, 2017 19:42:17 GMT -5
Could you modify m1 carbine mags like the ar mags to feed factory 22 tcm? My project has hit several snags. I am having weak ejection. A new ejector and extractor springs on my m1 carbine proved to give no ejection. Just received a polymer trigger housing for my m1 carbine. Hoping to fit it with my beretta 92 mag adapter. Maybe I can get my para mags to fit with some work.
|
|
|
Post by HMC710 on Aug 29, 2017 18:53:38 GMT -5
Yes, the M1 mags can be modified to feed the 22 TCM.
|
|
|
Post by mtndrew on Aug 30, 2017 22:47:30 GMT -5
So the hammer is different on my polymer trigger housing and is a pretty poor fit. I think modified m1 carbine mags are the way to go. Can I order some?
|
|
|
Post by HMC710 on Sept 4, 2017 16:12:41 GMT -5
To fit your M1 Carbine set up? What is your bullet OAL you will be using?
|
|
|
Post by mtndrew on Sept 10, 2017 22:41:38 GMT -5
38 super/45 acp oal.... 1.28 inch
|
|
|
Post by HMC710 on Sept 11, 2017 20:38:39 GMT -5
This is for your M1 Carbine clone correct? So you want a modified M1 Carbine mag set up for 1.28" oal, correct?
|
|
|
Post by mtndrew on Sept 14, 2017 10:29:10 GMT -5
That is correct. I think that will work.
|
|