|
Post by HMC710 on Jul 25, 2015 22:56:08 GMT -5
|
|
mgp
New Member
Posts: 6
|
Post by mgp on Jul 28, 2015 8:18:31 GMT -5
Yes I have im looking for how does the mag catch work? I would like a flush mount were I can use unmodified Tokarev mags
|
|
|
Post by HMC710 on Jul 28, 2015 20:30:59 GMT -5
I'll send some pics when Im back at the shop later this week.
|
|
mgp
New Member
Posts: 6
|
Post by mgp on Jul 29, 2015 7:58:06 GMT -5
I'll send some pics when Im back at the shop later this week. Ok Great and are these in stock? Thanks Mike
|
|
|
Post by HMC710 on Jul 30, 2015 15:13:41 GMT -5
The latch fits under the "shark fin" on the back of the Tok mag. You don't need the typical AR slot in the mag, but you should open up the feed lips a bit to clear the bolt and size the mag up if its too fat / thin / curved. We just had a run on flush mounts so I need to see what I have here and back at the work bench.
|
|
mgp
New Member
Posts: 6
|
Post by mgp on Jul 30, 2015 20:24:29 GMT -5
Which one would you recommend for a lefty? Can you press that catch with your trigger finger or does it take more pressure than that? Please Let me know what you have. Thanks Mike
|
|
|
Post by HMC710 on Aug 4, 2015 4:38:23 GMT -5
Yes, you can hit the latch with your trigger finger! I'll look through what I have this afternoon, just rolled in a few hrs ago....
|
|
mgp
New Member
Posts: 6
|
Post by mgp on Aug 26, 2015 10:09:25 GMT -5
Yes, you can hit the latch with your trigger finger! I'll look through what I have this afternoon, just rolled in a few hrs ago.... Just checking in to see if you had any left hand flush adapters ready to go ? Thanks Mike
|
|
|
Post by HMC710 on Sept 4, 2015 4:51:54 GMT -5
Bad news is i dont have any down here. Good news is ill be back at shop next week.
|
|
|
Post by HMC710 on Oct 19, 2015 14:06:14 GMT -5
Went through all the tooling the other day and freshened everything up. Updated the code a bit and am making up a fresh batch of adapters. So far, looking good.
|
|
|
Post by HMC710 on Jan 30, 2016 23:46:35 GMT -5
With the blow back Tok it takes a different adapter that has the ejector on it like the 9mm blowbacks. I need to make another run of these to go with our new pistols.
|
|
|
Post by HMC710 on Oct 7, 2018 21:06:50 GMT -5
Its been a long time since I've updated this page..... I just finished testing our new AR Pistol Mag for the Tokarev round. Bench testing went great at 100% cycle. Live fire, unfortunately, like the TCM is giving us nose high jams. We made a big change from our original Plan B design as our body feed lips are not the best design for that approach. But the rounds fed great...…. So, we went back to Plan A and working through the bugs on that. Hopefully I'm over thinking things again and just need to make the cuts and rack some shells it.
|
|
|
Post by HMC710 on Oct 8, 2018 22:21:02 GMT -5
Would like to be encouraged that testing went well tonight but I've been down this road many times before...…
|
|
|
Post by HMC710 on Oct 23, 2018 20:42:37 GMT -5
And to make matters worse, I've got a box of brass and can't find my dies...… I was hoping not to run all that surplus crap through the brand new upper, but sometimes ya have to dance with the one ya got.
|
|
|
Post by HMC710 on Oct 25, 2018 21:13:57 GMT -5
Cycled a bunch of Tok rounds through the latest Gen2 mag set up and can't wait to get to the range and live fire this thing.
|
|