conan
New Member
Posts: 1
|
Post by conan on Jan 12, 2019 20:27:55 GMT -5
New to the forum, very excited about getting a 357 Max AR built...haven't gun hunted in years, lol. Tired of being subject to the whims of the slug makers, have some family members that don't want that much recoil...here in Iowa we can use straight walled cases now...ready to learn!
|
|
|
Post by HMC710 on Jan 12, 2019 21:35:14 GMT -5
Welcome!
|
|
|
Post by johnforrest on Jul 16, 2019 8:28:04 GMT -5
Hi Conan,
I just joined too, I'm from Cedar Rapids area, are you close by? I put a 45 Raptor together last winter for deer hunting but not sure I would recommend it to anyone. That 357 looks interesting. Do you have any 7.62x25?
|
|
|
Post by HMC710 on Jul 18, 2019 21:04:07 GMT -5
Welcome John!
Thank for joining up and look forward to your addition.
|
|
|
Post by johnforrest on Jul 19, 2019 14:01:10 GMT -5
Thanks Tim, I've been trying to read up as much as I can before asking a bunch of questions. When we buy a barrel do you also include specs on upper parts special to 22TCM or is that all just standard stuff. Gas tube, gas block? I put together a 45 Raptor and it was a bugger getting it to go right. I may just order the whole upper, it almost looks like a wash price wise. What way do you prefer? I have a Ruger and Areo lower. Somewhere you mention a check list with all the options but I can't find it. Also really undecided about reg or 9R, easy mag/extra velosity?
|
|
|
Post by HMC710 on Jul 19, 2019 17:57:05 GMT -5
The TCM runs all stock AR parts, nothing special what so ever in the upper. We can do it any way you want. It depends if you want it assembled and tested or not. We will even use your parts if you want certain HG, upper, etc. Easiest is the 9R with a TCM upper on a glock AR lower. Send me an email to tim@thearguy.com for more details as this is an information forum only and not a "salesite"
|
|