|
Post by HMC710 on Oct 27, 2016 20:24:48 GMT -5
Picked up a new toy last month at PSA. Its a PA-9 Colt/Uzi mag dedicated lower. I was looking for the Glock model but they didn't have any stripped lowers on hand. The PA-9 has the built in ejector and takes stock Colt / CProduct mags, plus Uzi's that have been cut for the stock AR mag catch. Going to put it through its paces with one of the new 22 / 30 Uzi uppers. Plus, we have a mod that allows Blow back mags / adapters to function in gas guns, so I want to proof that out. I'll find a glock model someday to add to the collection.
|
|
|
Post by HMC710 on Dec 26, 2016 8:57:05 GMT -5
Ok, got plans for this one and another BB we picked up last spring but never had the time. Both of these lowers are tailor made for the Uzi line of ammo.
|
|
|
Post by HMC710 on Jan 3, 2017 20:41:08 GMT -5
I've got a small stack of 30 cal pistol blanks on the bench so the 30 Luger and 30 Uzi will be the first barrels for the PA-9. Simple conversions and Tok performance from an Uzi mag.
|
|
|
Post by HMC710 on Jan 8, 2017 15:42:50 GMT -5
Here is the Palmetto State Armory PA-9 stripped lower It is set up for Colt / CProduct style mags with the extension on the back for the BHO. I knocked out some 10" 30 cal barrels today so one is a 30 Carbine for testing our new mag adapter set up, I've already got a 30 Luger so we can test that out in blow back, so I'll do one in 30 Uzi but a gas version with a Tok port on it. The plan is to pull the extractor and see what mods need to be made to the ramp to get the Uzi rounds running DI mode.
|
|
|
Post by HMC710 on Jan 9, 2017 17:51:54 GMT -5
Had a 30 Luger upper on the rack so I assembled the PA-9 for some testing. There was a slight interference between the BHO and the non-ramped bolt but we quickly took care of that.
|
|