|
|
Post by HMC710 on Aug 16, 2011 6:41:33 GMT -5
Here is the latest from the BS files.  Have been working on the machine code off and on and hope to cut soon. |
|
|
|
Post by greywuuf on Aug 16, 2011 10:03:34 GMT -5
Oh OH I know.. Its a .... uhm wedge ?
|
|
|
|
Post by HMC710 on Aug 18, 2011 20:03:00 GMT -5
|
|
|
|
Post by greywuuf on Aug 18, 2011 21:16:00 GMT -5
Hole pattern looks strangely like it is going to end up as a billet lower.... planning on custom markings ?
Tok specific perhaps ?
|
|
|
|
Post by strycnine on Aug 20, 2011 19:40:56 GMT -5
Hmmmmmmm.
|
|
|
|
Post by HMC710 on Aug 21, 2011 8:28:36 GMT -5
Next....  |
|
|
|
Post by HMC710 on Aug 21, 2011 9:22:27 GMT -5
and next....  |
|
|
|
Post by HMC710 on Aug 21, 2011 11:07:43 GMT -5
and next.........  |
|
|
|
Post by greywuuf on Aug 21, 2011 13:35:50 GMT -5
single shot ? or.................... you have an idea for a replaceable /interchangeable mag well ? or you got the benchrest bug and are just building a trigger group to put a bolt gun on top of.
|
|
|
|
Post by HMC710 on Aug 22, 2011 16:49:59 GMT -5
and the next.....  |
|
|
|
Post by greywuuf on Aug 22, 2011 17:16:38 GMT -5
You just are not gonna give anything away are you ?
|
|
|
|
Post by HMC710 on Aug 23, 2011 11:36:22 GMT -5
|
|
|
|
Post by HMC710 on Aug 25, 2011 9:07:44 GMT -5
...... and the next....  hope it fits........  ;D well, one of those anyway.....  |
|
|
|
Post by HMC710 on Sept 13, 2011 5:48:44 GMT -5
Next?
|
|
